New! 10.7m Trailing Shoe Applicator

New 10.7m Trailing Shoe Applicator for Abbey Machinery

The new 10.7m Trailing Shoe is the latest addition to the Abbey Trailing Shoe range complementing the 6m and 7m systems. The 10.7 m trailing shoe follows the ground contours, and reduces in field compaction, while accurately placing nutrients at the correct location for the crop. The machine will fold into a neatly transportable solution on the tanker after each tanker load has been applied. The proven Vogelsang distributors, steel wear points and rubber outlets feed slurry in even lines behind the Trailing Shoe. While all these features are retained, the 10.7m trailing shoe promises to take full advantage of new design geometry and efficiently apply your slurries nutrients.

Key Features:

  • 42 ECQ hole ported Distributor for improved output from one distributor at 10.7m working width cw auto tensioning of the head.
  • Unique Boom geometry allows booms follow ground contours easily
  • Wider working width, faster throughput.
  • Transport Height, Significant Height reduction versus other Trailing shoes.
  • Folds behind the tanker, narrowed transport widths compared to wide machines that fold along the tanker length.
  • Unique Lowered Boom folding using Hydraulic folding rams, to protect hosing in transport.
  • Vertical folding inclined towards centre to minimize upper transport widths.

Key Benefits:

  • Lowest leaf contamination: Distributes the slurry below the canopy of the crop.
  • Reduced Compaction: Less runs up and down the field, which reduces compaction.
  • Better Nutrient usage: Reduced ammonia losses and reduced odour during application.
  • Can apply slurry later: Longer spreading window.
  • Retains a rear mounted splash plate, for flexibility in different working conditions.
  • Layflat easy to operate stone trap.
  • Sequenced folding system to reduce the hydraulic services required.
  • No internal hose restrictions as well supported hose joints which now gradually increase as the slurry flows out.
  • Machine rigidly mounted close to the tanker using the trailing shoe ready brackets.
  • 40mm piping supplies slurry via Flexible outlet hoses.
  • Ballast Weights (Mounting Brackets Not Included).

 

Size

Hp Required

hp

Minimum Transport Height

mm

Gross Weight

kg

Maximum Transport Width

m

Maximum Height Rigid Mounted

m

Auto Rev Valve

 

Exacut Distributor

10.5m

73

350

1410

2.56

3.25

Std.

ECQ Standard

 

Agree